According to the degree of rupture of the diesel generator cylinder and cylinder head, the repair method should be determined based on the degree of damage, the location of the damage, the situation of the working unit, and the equipment status. The commonly used repair methods are epoxy resin adhes

The cylinder block and cylinder head of diesel generators have different repair methods due to their different deformation parts and degrees. The commonly used repair methods are as follows.1. The protrusions near the screw holes on the cylinder surface can be smoothed with an oilstone or a fine fil

Nowadays, more and more enterprises rely on diesel generators to provide stable electricity. In order to keep diesel generators running normally for a long time, in addition to maintaining good lubrication and maintenance of the engine, the correct "load" is also very important. In fact, d

Maintenance of diesel generators:Water enters the diesel engineThe condensation phenomenon of water vapor in the air occurs due to temperature changes, forming water droplets that hang on the inner wall of the fuel tank and flow into diesel, causing the water content of diesel to exceed the standard

There are many precautions for starting and operating diesel generator sets, and users must pay attention to these precautions when using the set:1. For units that have been shut down for more than 24 hours, the trial valve must be opened first and the oil pump must be started. For units that have b

A diesel generator set is composed of an engine, a generator, and a control system, so it is called a generator set. A diesel generator set is a type of power generation equipment that uses diesel as the main fuel. It uses a diesel generator as the driving force to drive the generator (i.e. the elec